Inline Skate Stars

Sticky Snowboard Bindings? | How to Fix it!

What causes sticky snowboard bindings? Sticky bindings can be frustrating until you know how to clean or prevent it. I cover details about how to do it in this guide. So, read on!

What causes sticky snowboard bindings, you ask? Snowboard bindings are crucial for a remarkable snowboarding experience.

They transfer energy and respond to your body’s shifts for best control.

The best snowboard bindings are a snug fit to allow the boots to flex without letting them wobble or shift.

They’re also sturdy and made of plastic or rubber.

But sticky snowboard bindings can ruin the fun of snowboarding.

The problem is common in plastic and rubber bindings.

You likely have plastic or rubber bindings if you have this problem. 

I cover details of what causes sticky snowboard bindings and how to clean and prevent them.

You don’t want to miss out. So, l urge you to read this guide to the end. Let’s get to it!

What Causes Sticky Snowboard Bindings

Snowboard bindings are either plastic or rubber. Many things could go wrong to cause sticky snowboard bindings.

Below, I cover details of what causes sticky snowboard bindings!

1. Poor Storage

Plastic and rubber materials are best stored in a cool and dry place.

Poor storage means you don’t store your snowboard bindings in optimum temperature conditions. 

No doubt, your snowboard bindings will start to sticky when you have poor storage and extreme temperature conditions.

For example, humid conditions facilitate the stickiness of bindings. 

2. Coating Layer Breaking Down

Plastic and rubber materials have a coating layer, which degrades with time.

According to a Getty Education study, poor storage contributes to rubber and plastic degradation.

Exposure to light, ultraviolet radiation, oxygen, water, heat, and pollutants causes plastic and rubber to break down.

This is what makes rubber and plastic snowboard bindings sticky.

3. Outlived Useful Life

Rubber and plastic degrade after some time since they’re plant materials.

No doubt your rubber or plastic snowboard bindings will become sticky after using them for a while.

This happens because the plastic and rubber deteriorate after outliving their useful life and becoming sticky.

4. Contact with Water or High Temperatures

Water and relatively warm temperatures can also make snowboard bindings sticky.

Probably you poured water on your bindings and then stored them without allowing the water to dry off. 

You may have also stored your snowboard bindings in a relatively warm or hot environment, which promotes snowboard binding stickiness. 

You should know that water and other liquids promote plastic and rubber binding stickiness.

So, you should ensure the bindings are dry before storing them.

5. Poor Snowboard Bindings Quality

Some snowboard bindings don’t cut because they’re low quality.

Most likely, they’re made from low-end plastic or rubber, which aren’t sturdy and durable.

Low-quality snowboard bindings also degrade fast and quickly.

While some may have a thin layer coating, others don’t, making them deteriorate and become sticky fast.

How to Clean Sticky Snowboard Bindings
Inline skating V1

Now that you know why your snowboard bindings are sticky, it’s time to learn how to clean them.

There are many options available, and we’ll look at the primary ones. Let’s get going!

1. Windex or Rubbing Alcohol

Using Windex or rubbing alcohol is one of the easiest ways to clean sticky snowboard bindings.

Windex solution contains ammonia which breaks down the degrading coating on your snowboard bindings.

  • Add some alcohol or Windex solution to a piece of clean cloth or cotton wool.
  • Wipe away the stickiness on your snowboard bindings.
  • You may use a toothbrush to reach inaccessible areas.
  • Add more Windex or alcohol to the cloth or cotton and continue to clean until the stickiness is no more.

2. Use Water and Baking Soda 

Water and baking soda are excellent for cleaning sticky snowboard bindings affected by degrading plastic or rubber.

Here’s how to clean your sticky snowboard bindings using water and baking soda.

  • Wet a piece of cloth or cotton wool using warm water.
  • Work the cloth or wool through the bindings to remove the stickiness.
  • Rinse snowboard bindings with water and check if they’re still sticky.
  • If the stickiness persists, this is where baking soda comes to your aid.
  • Create a baking soda paste by mixing some baking soda and water.
  • Spread the baking soda paste around where you feel stickiness.
  • Allow it to stay on the sticky bindings for some time.
  • Use a piece of cloth to wipe off the baking soda paste. 
  • Repeat the process until you have removed the stickiness on your snowboard bindings.

How to Prevent Sticky Snowboard Bindings

Snowboards are primarily plastic, which is susceptible to becoming sticky. The good news is that you can prevent this from happening. 

Overall, it comes to proper care of your snowboard bindings. Below is a quick run down of how to prevent sticky snowboard bindings.

  • Store your snowboard bindings in a controlled environment with a humidifier.
  • Ensure the snowboard bindings are clean and dry when you come from a snowboarding session.
  • Keep your snowboard bindings away from UV light and high temperatures.

Replace Old and Sticky Snowboard Bindings

You should consider replacing your sticky snowboard bindings, especially when they’re old and worn out.

At this point, no amount of cleaning can help prevent them from becoming sticky occasionally. 

You’d get new ones instead of spending more money and time cleaning your old bindings. 

Below are some of the best snowboard bindings you can try out. Feel free t check them out on Amazon.

  1. System Pro AM Snowboard Bindings
  2. System MTN Men’s 2022 Rear Entry Step in Style Snowboard Bindings
  3. Union Flite Pro Snowboard Bindings Black Sz L (10.5+)
  4. System LTX Men’s Rear Entry Step in Style Snowboard Bindings 2022
  5. System LUX Women’s Rear Entry Flow Style Snowboard Bindings (M/L)

Sticky Snowboard Bindings | Wrapping Up

Sticky snowboard bindings can be annoying, and there’s no doubting it. The good news is that you no longer have to stress about it.

You can remove the stickiness by using baking soda, alcohol, and some warm water in less than 10 minutes. This guide is all you need to get started.

You may also consider replacing old snowboard bindings when you have limited time for occasional removal of snowboard binding stickiness. 

That’s it! I hope you found this guide helpful.

More Reading>> Are Ice Skating Rinks Cold?

Navick Ogutu
Navick Ogutu

Navick is a full-time freelance writer, blogger, and internet marketer. By day, he creates content for multiple sites including inlineskaterstars.com. Over the weekend, he goes out skating with friends.

Articles: 176
Checklist: Discover the Must-Have Skating Gear, Equipment, & Accessories for Skaters... you don't want to miss this!

Enter your name and best email below and we'll send you the checklist of the must-have skating gear, equipment, and accessories.